Post-harvest Technology of Horticultural Crops
"This page is Intentionally Left Blank"
Post-harvest Technology of Horticultural Crops
Sharon Pastor Simson Martha C. Straus
Oxford Book Company Jaipur. India
ISBN: 978-93-80179-25-4
Edition 2010
Oxford Book Company 267, IO-B-Scheme, Opp. Narayan Niwas, Gopalpura By Pass Road, Jaipur-302018 Phone:OI41-2594705,Fax:OI41-2597527 e-mail: [emailprotected] website: www.oxfordbookcompany.com
© Reserved
Typeset by: Shivangi Computers 267, IO-B-Scheme, Opp. Narayan Niwas, Gopalpura By Pass Road, Jaipur-302018
Printed at: Mehra Offset Press, Delhi
All Rights are Reserved. No part ofthis publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, without the prior written permission of the copyright owner. Responsibility for the facts stated, opinions expressed, conclusions reached and plagiarism, if any, in this vo lume is entire Iy that of the Author, according to whom the matter encompassed in this book has been originally created/edited and resemblance with any such publication may be incidental. The Publisher bears no responsibility for them, whatsoever.
Preface Post-harvest handling is the stage of crop production immediately following harvest, including cooling, cleaning, sorting and packing. The instant a crop is removed from the ground, or separated from its parent plant, it begins to deteriorate. Post-harvest treatment largely determines final quality, whether a crop is sold for fresh consumption, or used as an ingredient in a processed food product. The most important goals of post-harvest handling are keeping the product cool, to avoid moisture loss and slow down undesirable chemical changes, and avoiding physical damage such as bruising, to delay spoilage. Sanitation is also an important factor, to reduce the possibility of pathogens that could be carried by fresh produce. After the field, post-harvest processing is usually continued in a packing house. This can be a simple shed, providing shade and running water, or a large-scale, sophisticated, mechanised facility, with conveyor belts, automated sorting and packing stations, walkin coolers and the like. In mechanised harvesting" processing may also begin as part of the actual harvest process, with initial cleaning and sorting performed by harvesting machinery. Initial post-harvest storage conditions are critical to maintaining quality. Each crop has an optimum range for storage temperature and humidity. Also, certain crops cannot be effectively stored together, as unwanted chemical interactions can result. Various methods of high-speed cooling, and sophisticated refrigerated and atmospherecontrolled environments, are employed to prolong freshness, particularly in large-scale operations. Regardless of the scale of harvest, from domestic garden to industrialised farm, the basic principles of post-harvest handling for most crops are the same: handle with care to avoid damage, cool immediately and maintain in cool conditions, and cull. This book covers post-harvest factors affecting fruit and vegetable quality, waste management, safety factors, and processing methods. The conventional as well as modem post-harvest technologies are described it detail. This book will be an invaluable resource for research professionals, quality control personnel and postharvest biology students anyone involved in the technology for handling and storing fresh fruits, vegetables, and ornamentals.
Sharon Pastor Simson Martha C. Straus
"This page is Intentionally Left Blank"
Contents Preface 1. Horticulture Production: Global Trends
v 1-12
2. Harvest Systems
13-20
3. Post-harvest Handling
21-40
4. Packaging of Horticultural Products
41-72
5. Hygiene and Sanitation in Post-harvest Handling
73-86
6. Storage of Fruits and Vegetables
87-106
7. Post-harvest Quality and Safety Management
107-128
8. Preservation of Fruits and Vegetables
129-156
9. Processing of Fruits and Vegetables
157-208
10. Freezing of Fruits and Vegetables
209-236
11. Preparing Products for Market
237-248
12. Prevention of Post-harvest Losses
249-302
Bibliography
303-304
Index
305-306
"This page is Intentionally Left Blank"
1 Horticulture Production: Global Trends
Recently, the Food Agricultural Organisation of the United Nations (FAO) predicted that the world population would top eight billion by the year 2030. Therefore, the demand for food would increase dramatically. As stated in the FAO report, Agriculture: Towards 2015/30", remarkable progress has been made over the last three decades towards feeding the world. While global population has increased over 70 percent, per capita food consumption has been almost 20 percent higher. In developing countries, despite a doubling of population, the proportion of those living in chronic states of under nourishment was cut in half, falling to 18 percent in 1995/97. According to the report, crop output is projected to be 70 percent higher in 2030 than current output. Fruits and vegetables will play an important role in providing essential vitamins, minerals, and dietary fibre to the world, feeding populations in both developed and developing countries. II
In developed countries, the U.s. continues to dominate the international trade of fruits and vegetables, and is ranked number one as both importer and exporter, accounting for approximately 18 percent of the $40 billion (USD) in fresh produce world trade. As a group, the European Union (EU) constitutes the largest player, with 15 additional export and import commodities contributing about 20 percent to total fresh fruit and vegetable trade. Within Europe, Germany is the principal exporter; Spain is the principal supplier; and the Netherlands plays an important role in the physical distribution process. In the Southern Hemisphere, Chile, South Africa, and New Zealand have become major suppliers in the international trade of fresh fruit commodities, although they remain insignificant in vegetable trade. FAO estimated that the world production of fruits and vegetables over a three-year period was 489 million tons for vegetables and 448 million tons for fruits. This trend increased as expected, reaching a global production of 508 million tons for vegetables and 469 tons for fmits in 1996. This trend in production is expected to increase at a rate
2
Post-harvest Technology of Horticultural Crops
of 3.2 percent per year for vegetables and 1.6 percent per year for fruits. However, this trend is not uniform worldwide, especially in developing countries where the lack of adequate infrastructure and technology constitutes the major drawback to competing with industrialised countries. Nevertheless, developing countries will continue to be the leaders in providing fresh exotic fruits and vegetables to developed countries. Most developing countries have experienced a high increase in fruit and vegetable production, as in the case of Asia and South America. Asia is the leading producer of vegetables with a 61 percent total volume output and a yearly growth of 51 percent. However, the U.s. continues to lead in the export of fresh fruits and vegetables worldwide with orange, grapes, and tomatoes. Brazil dominates the international trade of frozen orange juice concentrate, while Chile has become the major fresh fruit exporter with a production volume of 45 percent. Despite the large growth in exports in the 1990s, the U.S. remains a net importer of horticultural products. As U.S. consumers have become more willing to try new fruit and vegetable varieties, the imported share of the domestic market has increased. According to a USDA report, the total value of horticultural products imported into the U.S. has grown by more than 50 percent since 1990. If long-term projections hold for the next decade, the U.s. could achieve a trade balance surplus in horticultural products, due mainly to a global increase in the market. While the import value of horticultural products is projected to grow at 'a steady rate of 4 percent per year, between 1998 and 2007, the USDA's baseline projection period for exports are projected to grow by 5 to 7 percent per year. The top six fruit producers, in declining order of importance, are China, India, Brazil, USA, Italy, and Mexico. China, India, and Brazil account for almost 30 percent of the world's fruit supply, but since most of this production is destined for domestic consumption its impact on world trade is minimaL TRADITIONAL CONSUMPTION
Fruit and vegetable consumption per capita showed an increase of 0.38 percent for fresh fruits and 0.92 percent for vegetables per capita from 1986 to 1995. The highest consumption of fresh fruits was registered in China (6.4%), as the apparent per capita consumption of vegetables in China went from 68.7 kg per capita in 1986 to 146 kg in 1995 (53.8% growth rate), while African and Near East Asian countries showed a decrease in fresh fruit consumption. The lowest consumption of vegetables per capita was registered in Sub-Saharan Africa. According to trade sources, Chinese customers purchased most of their fresh fruit at street retail shops and market places where imported fresh fruits are available and U.S. and European brand names have received recognition. Products such as Red Delicious apples, Sunkist oranges, and Red Globe table grapes are especially popular. Sunkist is one of the few brands of oranges consumers
Horticulture Production: Global Trends
3
recognise. The trend toward fresh vegetable consumption in developing countries is one indication of the population's standard of living, but generally, fresh vegetables lose their market share to processed products. Many vegetables can be processed into canned products that cater to local tastes. Easy to carry and convenient to serve, they can be stored for a long time, reducing losses incurred from the seasonal supply of surplus vegetables marketed yearly at the same time. Urban population is exploding in developing countries, having risen from 35 percent of the total population in 1990, and projected to rise 54 percent in 2020. With increasing urban populations, more free markets and wholesale markets will be required to increase the supply of fresh fruits and vegetables. For example, the growth of consumption in the U.s. has been stimulated partly by increasing demand for tropical and exotic fruits and vegetables. ECONOMIC AND SOCIAL IMPACT
Ongoing consumer demand for new fruits and vegetables in developed countries has contributed to an increase in trade volume of fresh produce in developing countries. This, in tum, has promoted the growth of small farms and the addition of new products, creating more rural and urban jobs and reduced the disparities in income levels among farms of different sizes. As countries become wealthier, their demand for high-valued commodities increases. The effect of income growth on consumption is more pronounced in developing countries, compared to developed countries, they are expected to spend larger shares of extra income on food items like meat and fruit and vegetable products. The implementation of international trade agreements, such as NAFTA (USA and Canada) and MERCOSUR (Argentina, Brazil, Paraguay and Uruguay), has significantly impacted the economy of the signatory countries by increasing the trade volumes and trade flows, particularly through general areas such as market access, tarification, limits on export subsidies, cuts in domestic supports, phyto-sanitary measures, and safeguard clauses. COMMERCIAL CONSTRAINTS
According to the USDA economic report, the commercial constraints on fruits and vegetables include:
Trade barriers: Natural and artificial barriers. Natural trade barriers include high transportation costs to distant markets, and artificial barriers include legal measures such as protectionist policies. Liberalisation of trade through international agreements has been instrumental in relaxing many legal trade barriers by reducing tariffs and by harmonising the technical barriers to trade. Scientific phyta-sanitary requirements: Importing countries set the standards that potential trade partners must meet in order to protect human health or prevent the
Post-harvest Technology of Horticultural Crops
4
spread of pests and diseases. For instance, Japanese imports of U.s. apples are limited to Red and Golden Delicious apples from Washington and Oregon. The Japanese, who are mainly concerned with the spread of fire blight, impose rigorous and costly import requirements on the U.s. apple shippers. The apples must be subjected to a cold treatment and fumigation with methyl bromide before shipment to Japan, and three inspections of U.S. apple orchards during the production stage. Infestation by fruit flies (Tepbritidae: Diptera), common in the tropics, is a major constraint to the production and export of tropical fruits.
Technological innovations: Countries can increase their competitiveness and world market shares by providing higher quality products and promoting lower prices through technological innovations. ' Trade liberalisation, negotiated through the Uruguay Round Agreement (URA) (of the GAIT and implemented under WTO), as well as through regional agreements, such as NAFTA and MERCOSUR, has expanded market access and provided strengthened mechanisms for combating non-tariff trade barriers such as scientifically unfounded phyto-sanitary restrictions. Future prospects of fruits and vegetables exported from developing countries will largely depend on the growth of import demand, mostly in the developed countries. Developed countries are expected to diversify their consumption of fruits and vegetables. This will increase the concern about health and nutrition; the consumer's familiarity with more fruits and vegetables because of wider availability, increased travel, and improved communications will lead to an increase in the ratio of imports to domestic products. POST-HARVEST LOSSES AND RESOURCE UNDER-UTILISATION IN DEVELOPING COUNTRIES
Postharvest losses of fruits and vegetables are difficult to predict; the major agents producing deterioration are those attributed to physiological damage and combinations of several organisms. Flores described postharvest losses due to various causes as follows: Food Losses after Harvesting
These include losses from technological origin such as deterioration by biological or microbiological agents, and mechanical damage. Losses due to technological origin include: unfavourable climate, cultural practices, poor storage conditions, and inadequate handling during transportation, all of which can lead to accelerated product decay. Physiological deterioration of fruits and vegetables refers to the aging of products during storage due to natural reactions. Deterioration caused by biochemical or chemical agents refers to reactions, of which intermediate and final products are undesirable.
Horticulture Production: Global Trends
5
These can result in significant loss of nutritional value and in many cases the whole fruit or vegetable is lost. Deterioration by biological or microbiological agents refers to losses caused by insects, bacteria, moulds, yeasts, viruses, rodents, and other animals. When fruits and vegetables are gathered into boxes, crates, baskets, or trucks after harvesting, they may be subject to cross-contamination by spoilage microorganisms from other fruits and vegetables and from containers. Most of the microorganisms present in fresh vegetables are saprophytes, such as coryniforms, lactic acid bacteria, spore-formers, coliforms, micrococci, and pseudomonas, derived from the soil, air, and water. Pseudomonas and the group of Klebsiella-EnterobacterSerratia from the enterobacteriaceae are the most frequent. Fungi, including Aureobasidium, Fusarium, and Alternaria, are often present but in relatively lower numbers than bacteria. Due to the acidity of raw fruits, the primary spoilage organisms are fungi, predominantly moulds and yeasts, such as Sacharomyces cerevisiae, Aspergillus niger, Penicillum spp., Byssochlamys fulva, B. nivea, Clostridium pasteurianum, Coletotrichum gloesporoides, Clostridium perfringes, and Lactobacillus spp. Psychrotrophic bacteria are able to grow in vegetable products; some of them are Erwina carotovora, Pseudomonas fluorescens, P. auriginosa, P. luteola, Bacillus species, Cytophaga jhonsonae, Xantomonas campestri, and Vibrio fluvialis. The existence of pathogenic bacteria in fresh fruit and vegetable products has been reported by Alzamora et aI., which include Listeria monocytogenes, Aeromonas hydrophila, and Escherichia coli 0157: H7. These bacteria are found in both fresh and minimally processed fruit and vegetable products. Listeria monocytogenes is able to survive and grow at refrigeration temperatures on many raw and processed vegetables, such as ready-toeat fresh salad vegetables, including cabbage, celery, raisins, feJ1nel, watercress, leek salad, asparagus, broccoli, cauliflower, lettuce, lettuce juice, minimally-processed lettuce, butterhead lettuce salad, broad-leaved and curly-leaved endive, fresh peeled hamlin oranges, and vacuum-packaged potatoes.
Aeromonas hydrophila is a characteristic concern in vegetables; it is a psychrotrophic and facultative anaerobe. Aeromonas strains are susceptible to disinfectants, including chlorine, although recovery of Aeromonas from chlorinated water has been reported. Challenging studies inoculating A. hydrophila in minimally processed fruit salads showed that A. hydrophila was able to grow at 5°C during the first 6 days, however, the pathogen decreased after 8 days of storage. E. coli 0157H:7 has emerged as a highly significant food borne pathogen. The principal reservoir of E. coli 0157H:7 is believed to be the bovine gastrointestinal tract. Thus, contamination of associated food products with faeces is a significant risk factor,
6
Post-harvest Technology of Horticultural Crops
particularly if untreated contaminated water is consumed directly or used to wash uncooked foods. Mechanical damage is caused by inappropriate methods used during harvesting, packaging, and inadequate transporting, which can lead to tissue wounds, abrasion, breakage, squeezing, and escape of fruits or vegetables. Mechanical damage may increase susceptibility to decay and growth of microorganisms. Some operations, such as washing, can reduce the microbial load; however, they may also help to distribute spoilage microorganisms and moisten surfaces enough to permit growth of microorganisms during holding periods. All methods of harvesting cause bruising and damage to the cellular and tissue structure, in which enzyme activity is greatly enhanced as cellular components are dislocated. Besides the above issues, most 'post-harvest losses in developing countries occur during transport, handling, storage, and processing. Rough handling during preparation for market will increase bruising and mechanical damage, and limits the benefits of cooling. By-products from fruit and vegetable processing are not wholly utilised in developing countries due to lack of machinery and infrastructure to process waste. The easiest way to dispose of by-products is to dump the waste or use it directly as animal feed. Waste materials such as leaves and tissues could be used in animal feed formulations and plant fertilisers. In general, it is estimated that between 49 to 80% goes to consumers in the production of a particular commodity, and the difference is lost during the varied steps that comprise the harvest-consumption system. Food Losses due to Social and Economic Reasons
Policies: This in:volves political conditions under which a technological solution is inappropriate or difficult to put in to practice,. for example, lack of a clear policy capable of facilitating and encouraging utilisation and administration of human, economic, technical, and scientific resources to prevent the deterioration of commodities. Resources: This is related to human, economic, and technical resources for developing programs aimed at prevention and reduction of post-harvest food losses. Education: This includes unknown knowledge of technical and scientific technologies associated with preservation, processing, packaging, transporting, and distribution of food products. '
Horticulture Production: Global Trends
7
Services: This refers to inefficient commercialisation systems, and absent or inefficient government agencies in the production and marketing of commodities, as well as a lack of credit policies that address the needs of the country and participants. Transportation: This is a serious problem faced by fruit growers in developing countries, where vehicles used in transporting bulk raw fruits to markets are not equipped with good refrigeration systems. Raw fruits exposed to high temperatures during transportation soften in tissue and bruise easily, causing rapid microbial deterioration. Pre-processing to Add Value
Rapid cooling of produce following harvest is essential for crops intended for transport in refrigerated ships, land vehicles, and containers not designed to handle the £Ullioad of field heat but capable of maintaining precooled produce at a selected carriage temperature. The selected method of cooling will depend greatly on the anticipated storage life of the commodity. Rapidly respiring commodities with short post-harvest life should be cooled immediately after harvest. Therefore, added value is achieved in precooling the produce immediately after harvest, which will restrict deterioration and maintain the produce in a condition acceptable to the consumer. Blanching of fruits as a pre-treatment method may also be applied before freezing and juicing, or in some cases, before dehydration. The fruit may be blanched either by exposure to near boiling water, steam, or hot air for 1 to 10 minutes. Blanching inactivates those enzyme systems that degrade flavour and colour and cause vitamin loss during subsequent processing and storage. Pre-processing to Avoid Losses
Pre-processing of fruits and vegetables includes: blanching to inactivate enzymes and microorganisms, curing of root and tubers to extend shelf life, pre-treatment of produce with cold or high temperatures, and chemical preservatives to control pests after harvest. Storage of produce under controlled temperature and relative humidity conditions will extend its perishability and reduce decay. Packaging of produce in appropriate material enhances colour appearance and marketability. Alternative Processing Methods
A variety of alternative methods to preserve fruits and vegetables can be used in rural areas, such as fermentation, sun drying, osmotic dehydration, and refrigeration.
8
Post-harvest Technology of Horticultural Crops
Fruits and vegetables can be pre-processed via scalding to eliminate enzymes and microorganisms. Fermentation of fruits and vegetables is a preservation method used in rural areas, and due to the simplicity of the process, there is no need for sophisticated equipment; pickled produce, sauerkraut, and wine are examples of this process. A general schematic diagram of the different alternative processes for fruits and vegetables is presented in Figure 1, and described as follows:
Pickles, Sauerkraut wines
Packaging cans, plastic bags
Storage
Figure 1. Processing of Fruits and Vegetables in Rural Areas.
Cleaning and washing are often the only preservation treatments applied to minimally processed raw fruits and vegetables (MPRFV). As the first step in processing, cleaning is a form of separation concerned with removal of foreign materials like twigs, stalks, dirt, sand, soil, insects, pesticides, and fertiliser residues from fruits and vegetables, as well as from containers and equipment. The cleaning process also involves separation of light from heavy materials via gravity, flotation, picking, screening, dewatering, and others. Washing is usually done with chlorinated water. The MPRFV product is immersed in a bath in which bubbling is maintained by a jet of air. This turbulence
Horticulture Production: Global Trends
9
permits one to eliminate practically all traces of air and foreign matter without bruising the product. Water must be of optimal quality for washing MPRFV products, otherwise cross contamination may occur. According to Wiley R.C, three parameters are controlled in washing MPRFV fruits and vegetables: 1.
Quantity of water used: 5-10 L/kg of product
2.
Temperature of water: 4°C to cool the product
3.
Concentration of active chlorine: 100 mg/L
Two examples of specially designed equipment used to wash fruits and vegetables include: 1) rotary drums used for cleaning apples, pears, peaches, potatoes, turnips, beets; high pressure water is sprayed over the product, which never comes in contact with dirty water, and 2) wire cylinder leafy vegetable washers, in which medium pressure sprays of fresh water are used for washing spinach, lettuce, parsley, and leeks. In rural areas, fresh produce could be poured into plastic containers filled with tap water to remove the dirt from fruits and vegetables. The dirty water could be drained from the containers and refilled with chlorinated water for rewashing and disinfection of the fruit or vegetable. If electricity is available, fresh produce could be refrigerated until processed or distributed to retailers and markets. Scalding or blanching in hot water
Fruits, fresh vegetables and root vegetable pieces are immersed in a bath containing hot water (or boiling water) for 1-10 minutes at 91-99°C, to reduce microbial levels, and partially reduce peroxidase and polyphenoloxydase (PPO) activity. The heating time will depend on the type of vegetable product processed Boiling water has been used to provide thermal inactivation of L. monocytogenes on celery leaves. Cooling in trays
This operation is carried out in perforated metal trays through which cool air is passed in order to cool the product prior to packaging in sterile plastic bags, unless another process is to follow: Sulphiting
During this operation, the fruit or vegetable pieces (or slices) are immersed in a solution of sodium bisulphite (200 ppm) to prevent undesira,ble changes in colour and any additional microbial and enzyme activity, and to retain a residual concentration of.100 ppm in the final product.
10
Post-harvest Technology of Horticultural Crops
Sun drying and osmotic dehydration
In rural areas, dehydration is probably the most effective method to preserve fruits and
vegetables. Fruit slices or vegetable pieces are spread over stainless metal trays or screens spaced 2-3 cm apart and sun dried. The dried fruit and vegetable products are then packaged in plastic bags, glass bottles, or cans, as with fruit slices or milled flour. In osmotic dehydration and crystallisation, the fruit is preserved by heating the product in sugar syrup, followed by washing and drying to reduce the sugar concentration at the fruit surface. Fruits are dried by direct or indirect sun drying, depending on the quality of the product obtained. The advantage of this method is the prevention of.discoloration and browning of fruit produced by enzymatic reactions. Thus, the high concentration of sugar in the fruit produces a dehydrated product with good colouring, without the need of chemical preservatives such as sulphur dioxide. Fermentation
This is another useful preservation process for fruit and vegetable products. For vegetables, the product is immersed into a sodium chloride solution, as in the case 'of cucumbers, green tomatoes, cauliflower, onions, and cabbage. Composition of the salt is maintained at about 12% by weight so that active organisms during fermentation, such as Lactic acid bacteria, and the Aerobacter group, produce sufficient acid to prevent any food poisoning organisms from germinating. Fruits, on the oth~r hand, can be preserved by fermenting the fruit pulp into wine, by preparing a solution of sugar and water and then inoculating it with a strain of Saccharomyces cerevisiae. Pickles, sauerkraut and wine making
Slightly underripe cucumbers are selected and cleaned thoroughly with water, then sizegraded prior to brining. For a large production of pickles, the fermentation process is carried out in circular wooden vats 2.5-4.5 m in diameter and 1.8-2.5 m deep. A small batch of pickles can be produced using appropriate plastic containers capable of holding 4-5 kg of cucumbers. After the cucumbers are put into the vats, a salt solution is added. This concentration is maintained by adding further salt as needed by recirculating the solution to eliminate concentration gradients. Sugar is added if the cucumbers are low in sugar content to sustain the fermentation process. The fermentation process will end after 4-6 weeks, and the salt concentration will rise to 15%. Under these conditions, pickles will keep almost indefinitely. Care must be taken to ensure that the yeast scum on top of the vat does not destroy the lactic acid. This can be done by adding a layer of liquid paraffin on the surface of the pickling solution. After the fermentation process has ended, the pickles are soaked in hot water to remove excess salt, then size-graded and packed into glass jars with acetic acid in the form of vinegar.
Horticulture Production: Global Trends
11
Sauerkraut Selected heads of cabbage are core-shredded and soaked in tap water with 2.5% (by weight) salt concentration and allowed to ferment. During the initial stages of fermentation, there is a rapid evolution of gas caused by Leuconostoc mesent'froides; this process imparts much of the pleasant flavour to the product. The next stage involves Lactobacillus cucumeris fermentation, resulting in an increase of lactic acid; and finally after approximately 5 days at 20-24°C, the third stage, involving a further group of lactic acid bacteria such as Leuconostoc pentoaceticus, which yields more lactic acid combined with acetic acid, ethyl alcohol, carbon dioxide, and mannitol. The fermentation process ends when the lactic acid production is approximately 1-2%. This can be tested by titration of the acid with a 0.1 N sodium hydroxide (N aOH) solution, using phenolphthalein (0.1% w/v) as colour indicator. After the fermentation process, either the tank is sealed to exclude air or the product is then packed into glass jars or canned. It is then ready for consumption. Wine making
Selected ripened fruits are transported to the farm where they are sorted, washed and macerated or chopped prior to pressing. In rural areas, juice is extracted from the fruit by squeezing (oranges, grapes, etc.) or pulped (mangoes, maracuya, guava, etc.). The soluble solid content of the pulp is measured with a refractometer in Brix. Soluble solids should be 25%, but if lower, it can be adjusted with sugar. Clarification
Clarification of wines prior to bottling involves treatment with gelatine, albumin, isinglass, bentonite, potassium ferrocyanide or salts the last two treatments are intended to reduce the level of soluble iron complexes, which would otherwise cause a darkening of the wine, but with fruit wine these are frequently inadequate. Alternative clarification procedures include chilling the wine prior to, or after, refining, and using microfiItration systems. A simple way to clarify wine is to add white gelatine (1 g per L of wine) to the fermented fruit solution, which is then allowed to stand in the refrigerator for 1 week, after which all of the suspended solids are precipitated and a clear transparent wine can be decanted from the top of the container. Following clarification, the wine will normally be flash pasteurised, hot-filled into bottles, or treated to give a residual S02 content (100 ppm). The next stage is to add sodium bisulphite to the fruit juice (200 ppm), allowing it to stand for 2-3 hours. During this process, the unwanted yeast flora present in the fruit pulp is eliminated and the added inoculum can act freely in the fruit juice to produce the desired flavour or bouquet characteristic of fruit wine. Next, the yeast is added to
12
Post-harvest Technology of Horticultural Crops
the juice. The fermentation process should be carried out anaerobically, that is in the absence of oxygen, to prevent development of other non-wine making bacteria, such as Acetobacter spp, which produces undesirable taste and flavour. The fermentation ends after 3 to 4 weeks at 22-2S°C. The final stage of processing involves the blending, sweetening and flavouring, and r. stabilisation of the wines. The b\endiitg process is done both to ensure consistency of product character and to reduce the strong aroma and flavour of certain wines. Although there is some preference for single wines, many are blended, especially with apple wine, which is relatively low in flavour. Wines can be sweetened using sugar or fruit juice, the latter also serving to increase the natural fruit content. In some cases, it is necessary to adjust the acidity of wine by adding an approved food-grade acid, such as citric or tartaric acid. In many rural areas, where these chemicals are not available, lemon juice can be used instead. For wine making in rural areas, the fermentation process is usually carried out in a large bottle (18-20 L), in which the ingredients are mixed with water. In order to keep the fermentation process under anaerobic conditions, a water-filled air-lock is fitted into a hollow cork or rubber stopper inside the mouth of the bottle. This can be made simply from a piece of plastic tubing and a bottle.
Storage Because sun dried and fermented fruit and vegetable products are stable, they can be stored at ambient temperatures or at low refrigeration temperatures, extending the shelf life for several months (6-12 months and beyond). Wine is stored in glass bottles and maintained at room temperature or it can be stored under refrigeration. Other fermented products such as sauerkraut and pickles are usually stored at room temperature. REFERENCES
Ahvenainen, R. 1996. "New approaches in improving the shelf life of minimally processed fruit and vegetables". Trends in Food Science and Technology. 179-197. Cook, R.L. 1998. "Post-harvest of horticultural crops. Proceedings of the World Conference on Horticulture Research". Acta Horticulture No. 494. FAO. 1995a. Small-scale Post-harvest Handling Practices -A Manual for Horticulture Crops. 3rd edition. Series No. 8. Proceedings on the World Conferences on Horticulture Research.1996. Global horticultural impact: fruits and vegetables in developed countries. Acta Horticulture 495, 39-66. Thompson, A.K. 1998. Controlled Atmosphere Storage of Fruits and Vegetables. Blackwell Science, Berlin, 14-17.
2 ~'Harvest
Systems
The harvest is the process of gathering mature crops from the fields. Reaping is the cutting of grain or pulse for harvest, typically using a scythe, sickle, or reaper. The harvest marks the end of the growing season, or the growing cycle for a particular crop, and this is the focus of seasonal celebrations of many religions. On smaller farms with minimal mechanization, harvesting is the most labor-intensive activity of the growing season. On large, mechanized farms, harvesting utilizes the most expensive and sophisticated farm machinery, like the combine harvester. Harvesting in general usage includes an immediate post-harvest handling, all of the actions taken immediately after removing the crop-cooling, sorting, cleaning, packing-up to the point of further onfarm processing, or shipping to the wholesale or consumer market. Harvest timing is a critical decision, that balances the likely weather conditions with the degree of crop maturity. Weather conditions such as frost, rain (resulting in a "wet harvest"), and unseasonably warm or cold periods can affect yield and quality. An earlier harvest date may avoid damaging conditions, but result in poorer yield and quality. Delaying harvest may result in a better harvest, but increases the risk of weather problems. Timing of the harvest often amounts to a significant gamble. Harvesting is the gathering of plant parts that are of commercial interest. These include:
F1'Uits-e.g. tomatoes, peppers, apples, kiwifruits, etc.; Root crops-e.g. beets, carrots etc; Leafy vegetables - spinach and Swiss chard; Bulbs-onions or garlic; Tubers - potatoes;
Stems - asparagus;
Post-harvest Technology of Horticultural Crops
14
Petioles-celery and Inflorescences - broccoli, cauliflower etc. Harvest marks the end of the growing period and the commencement of market preparation or conditioning for fresh products. Harvesting can be performed by hand or mechanically. However, for some cropse.g. onions, potatoes, carrots and others-it is possible to use a combination of both systems. In such cases, the mechanical loosening of soil facilitates hand harvesting. The choice of one or other harvest system depends on the type of crop, destination and acreage to be harvested. Fruits and vegetables for the fresh market are hand harvested while vegetables for processing or other crops grown on a large scale are mainly harvested mechanically. The main advantages of mechanised harvesting are speed and the reduced costs per ton harvested. However, because of the risk of mechanical damage, it can only be used on crops that require a single harvest. A decision to purchase equipment requires careful evaluation of: the initial investment required, maintenance costs and the long period in which equipment may have to stand idle. In addition to this, the entire operation needs to be designed specifically for mechanised harvesting-distances between rows, field leveling, pesticide spraying, cultural practices to varieties which can be adapted to rough handling. Market preparation (grading, cleaning, packing, etc.) and the trade should also be able to handle large volumes of produce. Hand harvesting is particularly suitable for crops with an extended harvest period. The rate of harvesting can be increased by hiring more workers if, for example, due to climate, there is accelerated ripening and a need to harvest the crop quickly. The main benefit of hand harvesting over mechanised harvesting is that humans are able to select the produce at its correct stage of ripening and handle it carefully. The result is a higher quality product with minimum damage. This is important for tender crops. However, adequate training, including supervision of the harvest crew, is required. Contractual arrangements with harvest labour also influences the final quality of product harvested. When wages are paid per week, fortnight or month, harvesting is undertaken carefully. However, when payment is per box, meters of row or number of harvested plants, harvesting can be careless. Establishing teams and division of labour also influences quality. Long working days and/or few breaks as well as extremely adverse conditions (excessive heat or cold) can result in unnecessary rough handling of produce. Harvest labour needs to be adequately trained to give them the necessary skills to select produce at the correct stage of ripeness or degree of maturity as well as sorting techniques to minimise damage.
15
Harvest Systems HARVES] RIPENESS AND READINESS FOR HARVEST
In many cases harvest ripeness and readiness for harvest are used synonymously. However, it is more technically accurate to use "ripeness" for fruits such as tomato, peach, pepper, etc. Here, the consumption stage continues after certain changes in colour, texture and flavor. On the other hand, in species where these changes do not occur such as asparagus, lettuce, and beets, the term "readiness for harvest" is preferable.
Maturity is the harvest index most widely used in fruits. However, physiological maturity needs to be distinguished from commercial maturity. The former is reached when development is over. It mayor may not be followed by the ripening process to achieve the commercial maturity required by the market. Every fruit shows one or more apparent signs when it reaches physiological maturity. For example, in tomato, the gelatinous mass fills the internallocules and seeds cannot be cut when fruits are sectioned with a sharp knife. In peppers, seeds become hard and the internal surface of the fruit starts colouring. Over maturity or over ripening is the stage that follows commercial maturity and is when the fruit softens and loses part of its characteristic taste and flavor. However, it is the ideal condition for preparing jams or sauces. Commercial maturity mayor may not coincide with physiological maturity. For cucumbers, zucchinis, snapbeans, peas, baby vegetables, and many others, commercial maturity is reached well before the end of development. At this point, it is necessary to differentiate between two types of fruits: climacteric and non-climacteric. Climacteric include for example tomatoes, peaches etc. They are capable of generating ethylene, the hormone required for ripening even when detached from the mother plant. Non-climacteric include for example peppers, citrus etc. Commercial maturity is only obtained on the plant (Table 1). Table 1: Climacteric and non-climacteric fruits.
Non-climacteric Bell pepper Blackberries Blueberries Cacao Cashew apple Cherry Cucumber Eggplant Grape Grapefruit Lemon Lime
Climacteric Olives Orange Pineapple Pomegranate Pumpkin Raspberries Strawberries Summer squash Tart cherries Tree tomato
Apple Apricot Avocado Banana Breadfruit Cherimoya Feijoa Fig Guanabana Guava Jackfruit Kiwifruit
Melons Nectarine Papaya Passionfruit Peach Pear Persimmon Plantain Plum Quince Sapodilla Sapote
Post-harvest Technology of Horticultural Crops
16 Loquat Lychee
Marney Mango
Tomato Watermelon
Climacteric fruits are autonomous from the ripening point of view and changes in taste, aroma, colour and texture are associated with a transitory respiratory peak and closely related to autocatalytic ethylene production. Climacteric fruits such as tomato reach full red colour even when harvested green. On the other hand, in non- climacteric fruits such as bell peppers, slight changes in colour take place after harvest. Full red colour is only obtained while fruit is attached to the plant. As a general rule, the more mature the product, the shorter its post-harvest life. For distant markets, this means climacteric fruits need to be harvested as early as possible, but always after reaching their physiological maturity. Changes in colour are the .most apparent external symptoms of ripening. They are the result of chlorophyll degradation (disappearance of green colour) and the synthesis of specific pigments. In some fruits such as lemons, chlorophyll degradation allows yellow pigments that are already present to show. However, these are masked by the green colour. Other fruits such as peaches, nectarines and some varieties of apples have more of one type of colour-the ground one is associated with ripeness and the cover in many cases is specific to the variety. Maturity can be estimated by colour charts based on the percentage of desired colour or by objective measurements with colourimeters. Degree of development is the harvest index most widely used in vegetables and some fruits, in particular those harvested immature. In soybean, alfalfa and other legume sprouts, harvest is undertaken before expansion of the cotyledon; in asparagus, when the stems emerging from soil reach a certain length; in haricot beans and other snapbeans when they reach a certain diameter; in snow peas and other legumes before seed development becomes evident. In lettuce, cabbage and other "head" forming vegetables, harvest is based on compactness while "shoulder" width is used in. beets, carrots and other roots. Plant size as a harvest index is used in many vegetables such as spinach. However, in the case of potato, sweet potato and other root vegetables, the percentage of tubers of a specific size is ·utilised. Many crops show apparent external symptoms when ready for harvest. These include for example tops falling over in onions, development of abscission layers in the pedicel of some melons, hardness of the epidermis of certain pumpkins, or shell fragility in some nuts. Degree of filling is an index used in bananas and mangoes while sweet corn is harvested when kernels are plump and no longer "milky". Colour, degree of development or both are the main criteria used for harvest in most fruits and vegetables. It is, however, common to combine these with other objective indices. These include for example, firmness (apple, pear, stone fruits), tenderness (peas),
Harvest Systems
17
starch content (apple, pear)r soluble solid content (melons, kiwifruit), oil content (avocado), juiciness (citrus), sugar content/acidity ratio (citrus), aroma (some melons), etc. For processing crops, it is important to keep a. constant flow of raw material in the harvesting schedule. It is therefore normal practice to calculate the number of days from flowering and/or the accumulation of heat units. HANDLING DURING HARVEST
Harvesting involves a number of other activities undertaken in the field. This includes those of commercial interest. Examples of operations ,to facilitate preparation for the market include pre-sorting, removal of foliage and other non-edible parts. In some cases, the product is completely prepared for the market in the field. However, the normal practice is' to empty the harvest containers into larger ones for transportation to the packinghouse. Here, they are dry or water dumped onto grading lines. While these activities are being undertaken, bruising which has a cumulative effect can affect the final quality of product. Different types of lesions exist. Wounds {cuts and punctures) occur as a result of loss of tissue integrity. This type of damage is frequent during harvest and mainly produced by the harvesting tools used for the removal of plants. Other causes include the nails of pickers or peduncles from other fruits. Rotting fungi and bacteria penetrate produce in this way. This type of damage can be easily detected and is usually removed during grading and packing. Bruises are more common than wounds. They are less noticeable and symptoms show up several days later when the product is in the· hands of the consumer. There are three main causes of bruises: 1.
Impa9t: Injury caused either by dropping the fruit (or packed fruits) onto a hard surface or the impact of fruit rubbing against other fruit.These types of bruises are common during harvest and packing.
2.
Compression: Deformation under pressure. This often occurs during storage and bulk transportation and is caused by the weight of the mass of fruits on bottom layers. It also happens when the packed mass exceeds the volume of the container or by the collapse of weak boxes or packages unable to withstand the weight of those piled up high.
3.
Abrasion: Superficial damage produced by any type of friction (other fruits, packaging materials, packing belts, etc.) against thin-skinned fruit such as pears. In onions and garlic abrasion results in the loss of protective scales.
Bruise symptoms depend on the affected tissue, maturity, type and severity of the bruise. They are cumulative and in addition to their traumatic effect, trigger a series of responses to stress, including the onset of healing mechanisms. This physiological reaction is as
Post-harvest Technology of Horticultural Crops
18
follows: a temporary increase in respiration which is associated with degradation; a transient production of ethylene, which accelerates maturation and contributes to softening. In some cases, mechanical disruption of membranes puts enzymes in contact with substrates which leads to the synthesis of secondary compounds that may affect texture, taste, appearance, aroma or nutritive value. Firmness on the site of impact decreasesrapidly because of damage and cell death as well as the loss of tissue integrity. The more mature the product, the more severe the damage. Its effect is exacerbated by higher temperatures and longer storage periods. Ethylene removal or neutralisation under controlled or modified atmosphere conditions reduces the speed of healing. However, atmospheric composition also reduces the rate of stress response mechanisms. HARVEST RECOMMENDATIONS
If the time of day can be selected, it is recommended to harvest during the cool morning hours. This is because products are more turgid. Furthermore, less energy is required for refrigeration.
Harvesting maturity is a function of the distance to the destination market: those within close proximity, allow ripening on the plant. Harvested product needs to be kept in the shade until the time of transportation Avoid product bruising. Harvesting scissors or knives should have rounded ends to prevent punctures and be sharp enough to prevent tearing off. Harvest containers should be cushioned, smooth and free of sharp edges. Do not overfill field containers and move them carefully. Minimise drop heights when transferring produce to other containers. Train harvest labour to handle produce gently and identify correct maturity for harvest. Wear gloves during harvest and handling to avoid damage to fruits. --CURING
Curing complements harvesting in certain crops and is needed to achieve a quality product. It is a process involving rapid loss of superficial humidity. In addition to developing some tissue changes, it prevents further dehydration. It also acts as a barrier for penetration of pathogens. In onions and garlic, curing is the drying of external scales together with colour development and neck closure. For root crops such as sweet potato, yams and tubers-e.g. potato-skin hardening prevents skinning during harvest and handling and the development of the healing periderma on wounds (suberisation). In pumpkins and other cucurbits, curing is the hardening of the skin while in citfus it isthe natural formation of a layer of lignified cells. This prevents the formation and development of pathogens.
19
Harvest Systems
Curing is normally undertaken in the field. In garlic and onions it is performed by undercutting and windrowing plants to protect them from direct sun or in heaps or burlap bags for a week or more. In potato, tubers must remain in the soil for 10-15 days after foliage is destroyed with herbicides. In sweet potato and other roots it is similar although it is normally carried out under shelters. If required, curing may be performed artificially in storage facilities by forced circulation of hot and humid air (Table 2). After curing, temperature and relative humidity conditions are set for long-term storage. Table 2. Recommended temperature and relative humidity conditions for curing.
Temperature Potato Sweet potato Yam Cassava Onion & garlic
15-20 30-32 32-40 30-40 33-45
(Oe)
Relative humidity
(%)
85-90 85-90 90-100 90-95 60-75
HARVEST FESTIVALS
A harvest festival is an annual celebration which occurs around the time of the main harvest of a given region. Given the differences in climate and crops around the world, harvest festivals can be found at various times throughout the world. Harvests festivals typically feature feasting, both family and public, with foods that are drawn from crops that come to maturity around the time of the festival. Ample food and freedom from the necessity to work in the fields are two central features of harvest festivals: eating, merriment, contests, music and romance are common features of harvest festivals around the world. In Asia, the Chinese Moon Festival is one of the most widely-spread harvest festivals in the world. In India, Pongal in January, Holi in February-March and Onam in August-September are a few famous harvest festivals. In North America, Canada and the US each have their own Thanksgiving celebrations in October-November. Numerous religious holidays, such as Sukkot, have their roots in harvest festivals. In Britain, thanks have been given for successful harvests since pagan times. The celebrations on this day usually include singing hymns, praying, and decorating churches with baskets of fruit and food in the festival known as Harvest Festival, Harvest Home or Harvest Thanksgiving. In British churches, chapels and schools and in Canadian churches, people bring in
food from the garden, the allotment or farm. The food is often distributed among the poor and senior citizens of the local community, or used to raise funds for the church, or charity.
Post-harvest Technology of Horticultural Crops
Nowadays the festival is held at the end of harvest, which varies in different parts of Britain. Sometimes neighbouring churches will set the Harvest Festival on different Sundays so that people can attend each other's thanksgivings. Farmers celebrated the end of the harvest with a big meal called a harvest supper. Some churches and villages still have a Harvest Supper. The modem British tradition of celebrating Harvest Festival in churches began in 1843, when the Reverend Robert Hawker invited parishioners to a special thanksgiving service at his church at Morwenstow in Cornwall. Victorian hymns such as "We 'plough the fields and scatter", "Come ye thankful people, come" and" All things bright and beautiful" but also Dutch and German harvest hymns in translation helped popularise his idea of harvest festival and spread the annual custom of decorating churches with home-grown produce for the Harvest Festival service. . As British people have come to rely less heavily on home-gIOwn produce, there has been a shift in emphasis in many Harvest Festival celebrations. Increasingly, churches have linked Harvest with an awareness of and concern for people in the developing world for whom growing crops of sufficient quality and quantity remains a struggle. Development and Relief organisations often produce resources for use in churches at harvest time which promote their own concerns for those in need across the globe. REFERENCES
FAO. 1989. Prevention of Post-Harvest Food Losses Fruits, Vegetables and Root Crops, a Training Manual. Rome. Olaeta-Coscorroza, J.A., and Undurraga-Martfnez, P. 1995. Estimacion del indice de madurez en paltas. In: Harvest and Post-harvest Technologies for Fresh Fruits and Vegetables. Proceedings of the International Conference, Guanajuato, Mexico. February 20-24, 521-425. Peleg, K. 1985. Produce Handling, Packaging and Distribution. The AVI Publishing Co., Westport, Conn, 2053. Segre, A. 1998. Global horticultural impact: Fruits and vegetables in developing countries. World Conference on Horticultural Research, Rome, Italy, June 17-20.
3 Post-harvest Handling
Postharvest handling is the stage of crop production immediately following harvest, including cooling, cleaning, sorting and packing. The instant a crop is removed from the ground, or separated from its parent plant, it begins to deteriorate. Post-harvest treatment largely determines final quality, whether a crop is sold for fresh consumption, or used as an ingredient in a processed food product. The most important goals of post-harvest handling are keeping the product cool, to avoid moisture loss and slow down undesirable chemical changes, and avoiding physical damage such as bruising, to delay spoilage. Sanitation is also an important factor, to reduce the possibility of pathogens that could be carried by fresh produce, for example, as residue from contaminated washing water. After the field, post-harvest processing is usually continued in a packing house. This can be a simple shed, providing shade and running water, or a large-scale, sophisticated, mechanized facility, with conveyor belts, automated sorting and packing stations, walk-in coolers and the like. In mechanized harvesting, processing may also begin as part of the actual harvest process, with ini~al cleaning and sorting performed by the harvesting machinery. Initial post-harvest storage conditions are critical to maintaining quality. Each crop has an optimum range for storage temperature and humidity. Also, certain crops cannot be effectively stored together, as unwanted chemical interactions can result. Various methods of high-speed cooling, and sophisticated refrigerated and atmospherecontrolled environments, are employed to prolong freshness, particularly in large-scale operations. Regardless of the scale of harvest, from domestic garden to industrialized farm, the basic principles of post-harvest handling for most crops are the same: handle with care to avoid damage (cutting, crushing, bruising), cool immediately and maintain in cool conditions, and cull (remove damaged items). Once harvested, vegetable and fruit are subject to an active process of decay. Numerous biochemical processes (postharvest physiology) are continuously changing
22
Post-harvest Technology of Horticultural Crops
the original composition of the crop until it becomes no longer marketable. The period before drastic change has occurred is defined as the time of "post harvest freshness" .since freshness is an important factor in product quality, its evaluation should rest upon objective methods, but until recently only sensory tests or mechanical and colorimetric, (optical) criteria have been used. A recent study attempted to discover a biochemical marker and fingerprint methods to serve as a freshness index. MATURITY INDEX FOR FRUITS AND VEGETABLES
The principles dictating at which stage of maturity a fruit or vegetable should be harvested are crucial to its subsequent storage and marketable life and quality. Postharvest physiologists distinguish three stages in the life span of fruits and vegetables: maturation, ripening, and senescence. Maturation is indicative of the fruit being ready for harvest. At this point, the edible part of the fruit or vegetable is fully developed in size, although it may not be ready for immediate consumption. Ripening follows or overlaps maturation, rendering the produce edible, as indicated by taste. Senescence is the last stage, characterised by natural degradation of the fruit or vegetable, as in loss of texture, flavour, etc. Some typical maturity indexes are described in following sections. Skin Colour This factor is commonly applied to fruits, since skin colour changes as fruit ripens or matures. Some fruits exhibit no perceptible colour change during maturation, depending on the type of fruit or vegetable. Assessment of harvest maturity by skin colour depends on the judgment of the harvester, but colour charts are available for cultivars, such as apples, tomatoes, peaches, chilli peppers, etc., Optical Methods
Light transmission properties can be used to measure the degree of maturity of fruits. These methods are based on the chlorophyll content of the fruit, which is reduced during maturation. The fruit is exposed to a bright light, which is then switched off so that the fruit is in total darkness. Next, a sensor measures the amount of light emitted from the fruit, which is proportional to its chlorophyll content and thus its maturity. Shape
The shape of fruit can change during maturation and can be' used as a characteristic to determine harvest maturity. For instance, a banana becomes more rounded in crosssections and less angular as it develops on the plant. Mangoes also change shape during maturation. As the mango matures on the tree the relationship between the shoulders of the fruit and the point at which the stalk is attached may change. The shoulders of
Post-harvest Handling
23
immature mangoes slope away from the fruit stalk; however, on more mature mangoes the shoulders become level with the point of attachment, and with even more maturity the shoulders may be raised above this point. Size
Changes in the size of a crop while growing are frequently used to determine the time of harvest. For example, partially mature cobs of Zea mays saccharata are marketed as sweet com, while even less mature and thus smaller cobs are marketed as baby com. For bananas, the width of individual fingers can be used to determine harvest maturity. Usually a finger is placed midway along the bunch and its maximum width is measured with callipers; this is referred to as the calliper grade. Aroma
Most fruits synthesize volatile chemicals as they ripen. Such chemicals give fruit its characteristic odour and can be used to determine whether it is ripe or not. These doors may only be detectable by humans when a fruit is completely ripe, and therefore has limited use in commercial situations. Fruit Opening
Some fruits may develop toxic compounds during ripening, such as ackee tree fruit, which contains toxic levels of hypoglycine. The fruit splits when it is fully mature, revealing black seeds on yellow arils. At this stage, it has been shown to contain minimal amounts of hypoglycine or none at all. This creates a problem in marketing; because the fruit is so mature, it will have a very short post-harvest life. AnalYSis of hypoglycine 'A' (hyp.) in ackee tree fruit revealed that the seed contained appreciable hypo at all stages of maturity, at approximately 1000 ppm, while levels in the membrane mirrored those in the arils. This analysis supports earlier observations that unopened or partially opened ackee fruit should not be consumed, whereas fruit that opens naturally to over 15 mm of lobe separation poses little health hazard, provided the seed and membrane portions are removed. These observations agree with those of Brown et al. who stated that bright red, full sized ackee should never be forced open for human consumption. Leaf Changes
Leaf quality often determines when fruits and vegetables should be harvested. In root crops, the condition of the leaves can likewise indicate the condition of the crop below ground. For example, if potatoes are to be stored, then the optimum harvest time is soon after the leaves and stems have died. If harvested earlier, the skins will be less resistant to harvesting and handling damage and more prone to storage diseases.
Post-harvest Technology of Horticultural Crops
24
Abscission
As part of the natural development of a fruit an abscission layer is formed in the pedicel. For example, in cantaloupe melons, harvesting before the abscission layer is fully developed results in inferior flavoured fruit, compared to those left on the vine for the full period. Finnness
A fruit may change in texture during maturation, especially during ripening when it may become rapidly softer. Excessive loss of moisture may also affect the texture of crops. These textural changes are detected by touch, and the harvester may simply be able to gently squeeze the fruit and judge whether the crop can be harvested. Today sophisticated devices have been developed to measure texture in fruits and vegetables, for example, texture analysers and pressure testers; they are currently available for fruits and vegetables in various forms. A force is applied to the surface of the fruit, allowing the probe of the penetrometer or texturometer to penetrate the fruit flesh, which then gives a reading on firmness. Hand held pressure testers could give variable results because the basis on which they are used to measure firmness is affected by the angie at which the force is applied. Two commonly used pressure testers to measure the firmness of fruits and vegetables are the Magness-Taylor and UC Fruit Firmness testers. A more elaborate test, but not necessarily more effective, uses instruments like the Instron Universal Testing Machine. It is necessary to specify the instrument and all settings used when reporting test pressure values or attempting to set standards. The Agricultural Code of California states that "Bartlett pears' shall be considered mature if they comply with one of the following: (a) the average pressure test of not less than 10 representative pears for each commercial size in any lot does not exceed 23 Ib (10.4 kg); (b) the soluble solids in a sample of juice from not less than 10 representative pears for each commercial size in any lot is not less than 13%". This Code defines minimum maturity for Bartlett pears and is presented in Table 1. Table 1. Minimum maturity standard of fresh Bartlett pears for selected pear size ranges. Pear Size Minimum Soluble Solids (%)
Below 10% 10% 11%
12%
6.0 em to 6.35 em £ 6.35 em Maximum Test Pressure (kg)
8.6 9.1 9.3 9.5
9.1 9.5 9.8 10.0
Table 1 can be simplified by establishing a minimum tolerance level of 13% soluble solids as indicator of a pear's maturity and in this way av